Yealink desk phones are pre-provisioned by net2phone Canada before shipment. Once connected to the network, the phone will automatically retrieve its configuration.
Supported models
The connection steps in this article apply to the following Yealink desk phone models supported by net2phone Canada:
Connect your Yealink phone
Yealink SIP desk phones include a phone unit and an Ethernet cable. Connect the handset, network cable, and power, if required, before allowing the phone to start.
Connect the handset
- Connect the handset cord to the handset.
- Connect the other end to the port marked with the handset icon on the back of the phone.
The port marked with a headset icon is intended for a compatible headset and should not be used for the handset.
Connect to your network
- Plug the Ethernet cable into the Internet or LAN port on the back of the phone.
- Plug the other end into a wall network jack, router, or network switch.
If Power over Ethernet (PoE) is available on your network, the phone will receive power through the Ethernet connection and should power on automatically.
Connect Yealink through your computer
If your workspace has only one available wired network connection, you can daisy-chain the Yealink phone to pass the network connection through to your computer.
- Connect the incoming Ethernet cable from the wall jack, router, or switch to the Internet or LAN port on the Yealink phone.
- Connect a second Ethernet cable to the PC port on the back of the phone.
- Connect the other end of the second Ethernet cable to the Ethernet port on your computer.
Your devices should be connected in the following order:
Wall jack, router, or switch → Internet/LAN port on Yealink phone → PC port on Yealink phone → Computer
The phone remains connected to the network while passing the wired connection through to the computer.
Connect the incoming network cable to the Internet or LAN port, not the PC port. The PC port is used only to connect a computer through the phone.